You are reading a single comment by @BigH and its replies.
Click here to read the full conversation.
BigH-
That's what I'd do.
Last tub I removed took a couple metal tyre levers.
-
2 thin coats on rim and one on tub should be more than enough?
I usually three coat on rims, two on tubs (left to dry after each apply), after drying, install and inflated to max pressure and leave for 24 hours for customer bicycles (best to be safe than sorry).
Smallfurry
edscoble
I'd do one coat on the tub. Dry.
Then a coat on the rim just before mounting.
This on a rim with lose bits of glue removed. But otherwise uncleaned. I consider the old glue to act as my first coat.