What BB?

I am building up a bike with a Campagnolo Daytona chain set and have a question regarding bottom brackets.

I was running the frame as a fixed gear before and have removed a fairly new sealed Shimano UN-55 bb. I assume this will not be compatible with the Campag components? I do have a 3 part Campag bb that was in the frame when i got it but i think it is a bit rough. Can anyone suggest a sealed bb that would work well with the Daytona chain set?

which bb

Also I think it's 102mm ISO, so theres a chorus bb that you can still get new.

Okay so the 3 part bb i would like to use has an axle length of 111mm. i assume this is pretty standard?

Anyone hava a tool i can borrow to assist in fitting the cups? (mainly the cup in the middle)

111mm was standard for all double cranks, prior to 1995.

In 1995 Record and Chorus went 102mm, but the rest remained 111mm: so this will fit.

I have the tools, but will have to be exchanged via post.

Cartridge BB:

• http://www.wiggle.co.uk/campagnolo-centaur-tapered-bottom-bracket/
  
• http://www.gbcycles.co.uk/p/23568/Campagnolo-Veloce-Bottom-Bracket
  

thanks for the info....what tool do i need to fit the cup with the holes in? i have a spanner for the other cup.

I have a BB for sale, if interested.. 24 posted :)

Buy another UN-55 of the correct length...

what tool do i need to fit the cup with the holes in?

A pin spanner: mine is by Icetoolz, but it's a generic tool, with plenty of alternatives.

I didn't think Campag and Shimano were interchangeable. ? ISO...Etc

The old campagnolo be like the one you have 3 part have a different taper to the iso taper used after 1995 therefore it will not fit well. What is needed is a centaur 11 1 mm iso taper bb's or the tifosi bb 11 1 mm iso taper.

Day to a became centaur after a couple of years and uses a 11 1 mm iso taper bb.