You are reading a single comment by @Lukas and its replies.
Click here to read the full conversation.
-
Yup, same thread.
Mine came from a Halfords QR axle kit (BC discount; buying car paint the same day). Its cones measure just under 12mm at the bearing surface, so these could be used (like Andy's Instagram post above)...
I ordered the kit specifically for the bearing seat nuts, due to using a converted rear (old UG freehub model with a custom bearing insert), deciding it was better to have more surface area touching the bearing bore, since the DS bearing/insert is effectively held in by the nuts.
Lukas
Is that M9×1.0 thread? If so, the axle could come from any cheap Shimano road hub; I actually bought a Sora hub before deciding to go M10 at both ends with a step down at the ends of the front axle to fit 9mm fork ends.