You are reading a single comment by @Tetin and its replies.
Click here to read the full conversation.
-
Tie and solder has not been shown to make a wheel much stiffer or stronger, and you can accidentally overheat spokes if you do it. It's a pain if one breaks too.
http://sheldonbrown.com/brandt/tied-soldered.html
Now if you're doing it cos it's cool looking, well, go for it, if it's for performance probably not worth it ^_^
JWestland
@Tetin
Any troubles about tie and solder a double butted spokes on a 36h - 3 crosses pattern?
Thanks