Wound Up X2 fork

Selling my Wound Up X2 fork as I'm not using the bike it was part of.

225mm carbon steerer, with metal sleeve and star flanged nut fitted.

385mm a2c.

Crown is drilled for a brake and has a plastic/rubber bung fitted at the front.

Sleeve on steerer near crown has what looks like 21/34 (could be 21134) etched into it by hand. Not sure if this is a serial number or something to do with the rake?

Large "Wound Up X2" decal on drive side leg, small "USA Made" decal on bottom rear of non driveside leg. Both decals are worn, the larger one more so.

Few light marks to surface of carbon legs, metal parts all in good condition.

Based on these being too long to go as a "medium parcel" I'm going to ask for £120 £100 posted.

A photo of them fitted incase chat of a2c has worried anyone,

And to show tyre clearance with a 700 x 23c tyre,

1"? or 1 1/8?

edit: I thought you were selling 2x wound ups :p

This should fly off the shelf. is it 1inch or 1 1/8?

Sorry, obvious mistake!

It's 1 1/8".

Nuuuu.. cant seem to get lucky with 1" wound ups... GLWS!

I can include an inverse shim for an extra fiddy dorrah.

385mm axle to crown seems quite unlikely

Am I measuring wrong?

Am I measuring wrong?

Nope.

"Although some differ, most agree fork length is measured parallel to the steerer, from the base of the crown race seat to the center of the axle."

Y U NO 1"?

I've always measured a2c to the top of the cutout on the dropout and from crown race seat to dropout. Seems that this way actually creates the same measurement (at least in this case) as parallel to steerer and to centre of axle.

Will amend my methods.

For clarity:

Measuring diagonally from crown race seat to dropout it's 385mm to the top of the dropout slot, about 390mm to where the centre of the axle would be.

Measuring parallel to the steerer makes it 380mm to top of dropout, 385mm to centre of axle.

So my measurement of 385mm stands.

Fair enough.odd fork then:)
What frame was it on just out of interest?

My Principia Track Jet.

With the longer a2c these would be awesome on a gangster track...

Cheers.

I measured the rake last night and it came out as 37mm.

Drop to £110 posted but will be withdrawing from here and putting on eBay tonight.

No longer for sale here.

These are now SOLD.
Thanks.