You are reading a single comment by @Howard and its replies. Click here to read the full conversation.
  • I have some trp spyres and a shutter precision dynamo hubbed wheel. Every now and again the edge clips one the spokes in my wheel. The clearance between the spokes and the caliper is pretty slim at the best of times.

    I know one solution is to move to hydro so I'd have slimmer calipers but £££££

    If I add some spacers/washers between the disk and my hub so that my caliper can move further away will I die?

  • If I add some spacers/washers between the disk and my hub so that my caliper can move further away will I die?

    No - you'll be fine, as long as you have the adjustment in the post mount to move the caliper further out.

About

Avatar for Howard @Howard started