If you buy them in boxes, they come without nipples, so you have your choice of nips to order separately. I like the DTSapim Hex ones, very easy to work on as you can tension everything from outside the rim rather than using a fiddly spoke key. If you don't already have the hex driver, you might as well get the Squorx nipples and accompanying driver as Torx is a technically superior drive interface.
The Squorx nipples appear to be 15 mm long with no mention of other lengths. Do you need to adjust the calculated spoke length to accommodate the longer nipple?
From the drawing, it seem like the overall length would be 15mm but the start of the thread is in the same place as a common 12mm nipple. That's the case with the Squorx nipples in my DT R24 factory built wheels, I assume they use the same nips in the factory that they sell as parts.
If you buy them in boxes, they come without nipples, so you have your choice of nips to order separately. I like the
DTSapim Hex ones, very easy to work on as you can tension everything from outside the rim rather than using a fiddly spoke key. If you don't already have the hex driver, you might as well get the Squorx nipples and accompanying driver as Torx is a technically superior drive interface.