You are reading a single comment by @tyeness and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
tyeness
Sounds a little like Shimano and the front mech but there are tips for it.
Might work on sram as well. set the low limit screw in the small ring and the 7th/8th sprocket.
Set cable tension.
Then shift to the 10th/11th (biggest).
then set the low limit screw again. It backs off and takes up the slack in the cable.
Then you only need to use the barrel adjuster (if you have one) for fine tuning.
Works pretty well to get the required tension in the cable.