You are reading a single comment by @Pete4Eyes and its replies.
Click here to read the full conversation.
-
Sounds a little like Shimano and the front mech but there are tips for it.
Might work on sram as well. set the low limit screw in the small ring and the 7th/8th sprocket.
Set cable tension.
Then shift to the 10th/11th (biggest).
then set the low limit screw again. It backs off and takes up the slack in the cable.
Then you only need to use the barrel adjuster (if you have one) for fine tuning.
Works pretty well to get the required tension in the cable.
Pete4Eyes
tyeness
@Pete4Eyes @TM Cool, well I'll stick with 10sp cos cheap is also good.
Looking forward to trying Shimano mind. When the Rival stuff is set up nicely, the shifting feels nice and crisp and quite light. BUT, getting it set up can be a pain sometimes - seems to take a lot of very fine cable tension adjustment to eliminate any rubbing, mostly on the front mech at either end of the cassette. In the appropriate chainring of course!