GT Edge Aero TT --> paint pron tarck conversion attempt

You are reading a single comment by @young_gun and its replies. Click here to read the full conversation.

•

jdmitch in reply to @young_gun

Actually, the steel dropouts would serve a second purpose - they would bring the rear from 130mm down closer to 120mm (probably about 122?), which will make it a better fit for most wheels I'd put in there.
I can't really afford for a custom job (as great as mr milec may be), so I will take my chances, and if it all goes pear-shaped, at least I have that as a backup.

•

young_gun in reply to @jdmitch

i highly doubt its going to narrow the rear track 8mm and a 120 rear wheal could easily be re-spaced to 130. i love crazy weird stuff as much as the next guy, there is just such an easy option for this.

•

Pete4Eyes in reply to @young_gun

It sounds like the track ends are going to be bolted on to the inside of the road dropouts?
That would reduce the spacing from 130 to (130 - (width of track ends)).
If the track ends are 4mm thick each then that is 122mm... Would be nice if they were 5mm thick...

About

Avatar for young_gun @young_gun started