You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
-
My square taper shimano 600 crankset does not slide far enough on the BB and there is a big gap between frame and cranks?
Which lubricant are you using on the tapers and bolt threads? When was the torque wrench you're using on the bolts calibrated? What chainline does your dial gauge show when using the drive side face of the BB shell as a reference?
gbj_tester
2 qusetions
(http://i.stack.imgur.com/bpCjp.jpg)
where can I get nuts and bolt for the traditional brake firtment?
and
My square taper shimano 600 crankset does not slide far enough on the BB and there is a big gap between frame and cranks?
many thanks
Theo