-
Concave washers here http://www.sjscycles.co.uk/dia-compe-dc56-1-2-moon-washer-front-each-prod31392/
M6 nyloc nuts almost anywhere, ebay LBS, screwfix etc etc.
Something like this
http://www.ebay.co.uk/itm/like/280827965621?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&chn=ps&device=c&rlsatarget=&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108&ff19=0If you need a through bolt buy some studding and cut to the size required, not a particularly elegant solution but probably easier than finding the correct bolt with the correct plain and threaded sections.
-
My square taper shimano 600 crankset does not slide far enough on the BB and there is a big gap between frame and cranks?
Which lubricant are you using on the tapers and bolt threads? When was the torque wrench you're using on the bolts calibrated? What chainline does your dial gauge show when using the drive side face of the BB shell as a reference?
You are reading a single comment by @TPR and its replies.
Click here to read the full conversation.
freezing77
gbj_tester
@TPR
2 qusetions
(http://i.stack.imgur.com/bpCjp.jpg)
where can I get nuts and bolt for the traditional brake firtment?
and
My square taper shimano 600 crankset does not slide far enough on the BB and there is a big gap between frame and cranks?
many thanks
Theo