You are reading a single comment by @laner and its replies. Click here to read the full conversation.
  • I had the same problem recently. What's the pressure like out of the main tap? And what's the pressure like out of the shower bit without the hose?

  • Taps are fine, and have replaced hose and shower head.

    Have realised the issue is that i have a gravity system but because it's a flat the cold water tank is at head/ceiling height in a cupboard rather than in the attic meaning as soon as the shower head is at head height there is no gravity pressure.

    Unless anyone knows a clever fix i'll need a pump or power shower fitted.

  • Have you tried the water saver shower head from Thames water, that I mentioned earlier?

  • Ah right, I think you need a pump then. I was going to say I made mine much better by getting a 20mm internal bore hose from Amazon rather than the 8 - 12mm ones that seem standard.

About

Avatar for laner @laner started