Hi,
I'm looking for a JIS taper 107mm bottom bracket with an ITA 70mm thread. Will be installing new Miche Primano cranks.
All I found on the internet are either very expensive or this cheep shimano thing: http://www.rosebikes.co.uk/article/shimano-bb-un55--bottom-bracket/aid:521583
But am not sure if this has a longer left spindle. Seen a couple of time one of these cheep shimano brackets installed with the left crank arm a lot further from the frame than the right.
@aepo started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Hi,
I'm looking for a JIS taper 107mm bottom bracket
with an ITA 70mm thread. Will be installing new Miche Primano cranks.
All I found on the internet are either very expensive or this cheep shimano thing:
http://www.rosebikes.co.uk/article/shimano-bb-un55--bottom-bracket/aid:521583
But am not sure if this has a longer left spindle. Seen a couple of time one of these cheep shimano brackets installed with the left crank arm a lot further from the frame than the right.