You are reading a single comment by @thecycleclinic and its replies.
Click here to read the full conversation.
-
an 18h silver hub is not an eash find. Royce is the only one i can think of
Where are you getting 18H Royce hubs? Their website says
The Mid Flange shell diameter is 52mm and is drilled in 12.16, 20, 24, 28, 32 hole.
and somebody on the TTForum was told that they couldn't do 18H when he asked re: a potential replacement for a broken Zipp
-
If your hub flange is less than 3.2mm thick i thick spoke washers are a good idea.
Cheers.
Probably is narrower than that.
Had another go on the way home so swapped back to a singlespeed wheel for just now anyway.
gbj_tester
M_V
@thecycleclinic
If your hub flange is less than 3.2mm thick i thick spoke washers are a good idea. Did that with some old campagnolo record hubs that look like they have been rebuilt a few times before it would be a shame for them to crack they are so smooth. To the guy with a cracked hub flange an 18h silver hub is not an eash find. Royce is the only one i can think of. Ther mid flange hub might have the right pcd.