You are reading a single comment by @Scilly.Suffolk and its replies.
Click here to read the full conversation.
-
I meant let some cable through, so the arms are set wider apart.
I found that if the arms are set close to the rim (so they have a very small range of movement), then friction in the cable-run (that's a tight bend when the cable leaves the lever and goes down the arm) can be enough to overpower the spring.
Scilly.Suffolk
Its close but no where near where it should be, good 5mm on each side roughly. Cant physically open them up anymore, calipers are already touching each other. Im baffled?