Wanted for beater project - fixed wheelset, bars, seat & post

Need the following parts to finish my beater project.

• 700c fixed wheelset, ideally silver with tyres and tubes. ✔️
  
• drop/track bars to fit 25.4mm stem. ✔️
  
• seat ✔️
  
• 25mm seatpost.
  
  

I'm not in London so will need parts to be posted.

Thanks

Got saddle, post and Prob stem. Will post photos in a bit. Thanks, tom

Got a Cinelli (A1 I think) drop bars in rough condition. They were excellent (well, except tape residue), then a busted stem scratched all the beauty off the middle. Would clean up okay, still totally straight and strong. I think they're 44's.

Got a sweet mint condition BLB saddle you can have £12 posted

Sella italia condor and ST Sakae post. £25 posted. Cinelli criterium track bars and Cinelli a1 110mm stem it would be asking about £30 for that. Cheers. T

1 Attachment

Doesn't sound too bad, you got pictures and price delivered near oxford?

Any chance of a picture?

I already have a stem unless the bars aren't 25.4mm? Have you got a for picture of them? And just to confirm, seatpost is 25mm?

Cinelli 65-44's. Some places online say 26mm but that shouldn't be an issue.

Tenner plus post?

They really need a cleanup, the old tape reside looks nasty until you put new stuff over the top. I can probably get a train over from Paddington to Oxford cheaper than posting, if you can meet off peak daytime or something. If I can get the bike on the train I can roll over within a mile or two of the station, but don't ask me to go Didcot or Faringdon!

Also got a near-new Brooks B17 for £35 ono, or a rough Selle Concor Supercorsa in white very worn but solid for about a tenner as well.

Couple of saddles here
http://www.lfgss.com/conversations/265571/#comment12198265

I'm not actually in Oxford so will need parts posted. You sure those bars will fit my stem? You got a picture of them?

I'll pass on the seats but thanks for the offer.

Like the BLB seat. How much posted to NN13?

Sorry, just re read it was £12 posted. I'll have that. Send me your PayPal details please?

enter code here

I now have bars, wheelset and seat sorted.

Just need a silver 25mm seat post and I'll be ready to start the build.

Posted your saddle today dude

25mm or 25.4mm?

If it's 25.4mm that's standard bmx size when you are searching. Many won't list 25.4 and just say bmx post. If it says pivotal it has a different style of clamp(well a screw that goes into the seat/saddle).

I will have to measure again to make sure.

Only need a seat post and bottom bracket now. Can't wait to start building it up.