You are reading a single comment by @miro_o and its replies. Click here to read the full conversation.
  • Both the Flo30 and the HED roll and corner in a very similar manner, but the Flo definitely has an aerodynamic (or, I admit, convincing placebo) effect once you start shifting that the HED does not.

  • Both the Flo30 and the HED roll and corner in a very similar manner, but the Flo definitely has an aerodynamic (or, I admit, convincing placebo) effect once you start shifting that the HED does not.

    I did a lol. Sorry. That'll be the extra 200g of imported flywheel effect.

    Any magic Fl0 have managed with a 30mm rim is surely totally ballsed up with a bulging 25mm tyre. They're likely to be less aero than a wide rim with parallel brake tracks no?

  • Not necessarily, no. It'll increase the front area, but provided that the CdA figure drops by a sufficient amount the overall drag will be reduced. Whether it does or not is another question, but an extra 2mm of width could easily be compensated for if the drag coefficient is significantly lower.

  • Any magic Fl0 have managed with a 30mm rim is surely totally ballsed up with a bulging 25mm tyre.

    Anything over a few degrees of yaw and the 'bulging' tyre isn't really bulging at all on the upwind side.

  • I own both wheelsets, you are welcome to try them yourself, back to back- I could bring them with me to Bespoked if you are attending?

About

Avatar for miro_o @miro_o started