You are reading a single comment by @Samwell and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
coventry_eagle
@Samwell
Jaja, I got all that, I initially screwed the adjuster right up to the BB, but it came a little loose. There was no allen bolt included in the sale (Ben), so I found a cross-headed bolt with the same (or very similar) threading.
I've managed to block the space at the moment by unscrewing the adjuster ring entirely from the threads and tightening it past the limit (near the BB). I think it still needs spacers fitting properly though, because this solution is obviously not ideal.
Ben, you know if these cranks were originally on the bike when Adam used it? If so, I'd have thought that the spacers that he installed were correct and shouldn't need adding to?
http://m.imgur.com/u6Q6r9I,qFVS7y4