-
Risers look a bit more troublesome though: 3T do different versions and it's not clear which clips they are
They are the clips shown in the picture, and they come with the +20mm and +10mm spacers and all the necessary bolts, so you have 57mm to 87mm from base bar to elbow cups in 10mm increments. They are the exact ones, from the same source, as I'm using on my RollerFort.
gbj_tester-
I meant which model clip: 3T specify different risers for different model clips.
Either way, if they come with risers it's a moot point. I thought not, as Bike24 state "Stack height can be adjusted in the range 57–87 mm using the riser kit (separately available)."
So, forks have left 'Merica; extensions, clips & chain ordered from Bike24; base bar & levers ordered from Fudges.
I think that means I haz everything I need to get on the road, even if not with my first choice of components...
Scilly.Suffolk
Risers look a bit more troublesome though: 3T do different versions and it's not clear which clips they are.
Another reason I was leaning towards Vuka, is that they are more readily available and (as these will be a stop-gap) I'd think they'd be easier to sell on.
Worth me checking the European suppliers though, bearing in mind EUR/GBP though.