You are reading a single comment by @VeniVidiViritin and its replies.
Click here to read the full conversation.
VeniVidiViritin-
Thanks, they are my Hipstersleds. ^.^
On a serious note - thanks all for the replies, but i still dont know what to do, because according to this http://www.lfgss.com/conversations/130300/ everything should be Plug&Play: Miche Primato Advanced + Miche 107mm + Miche + Miche = Buddha Fingaz
... at least it was all Plug&Play on my 2013 Langster frameset. :S
Kreddy
Thanks so far! I double checked all I could without taking the BB out.
Cranks are JIS, like in a picture above. BB packaging which i saved for almost a year now says it's 107mm. I even bought them in one purchase from Evans Cycles, so they shouldn't be from different eras. The chainline itself is also fine, the main concern is - how could there be so little spacing between chainstay and chainring bolt with a 107mm on a Parallax:
It's a 1mm!!! I never had "so tight tarCk geometry" :) frames before and if you can assure me that it's ok then ill rest my case.
Cheers!