You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
gbj_tester
I'm not sure that's correct. My understanding, admittedly based on motorsports wind tunnel testing and CFD work rather than for bicycles, is that it's the trailing edge which is most important, hence why a teardrop shape has a much lower Cd figure than a reverse teardrop shape:
Also, if you had the pointed end at the front then the drag profile would be very susceptible to yaw. It might be aerodynamic if the airflow was from directly ahead at all times, but as soon as the airflow started coming at it from an angle you'd get horrible vortices off the sharp leading edge.
I think the Cervelo RCA white paper shows it most clearly at Figure 16. If the leading edge was most important, then the oval shape would be superior to the teardrop aerofoil shape.
Edit: Found figure 16 as a .gif, it's here:
P.S. It also shows that a Kamm tail (the third profile) is better than a circle, but still nowhere near as good as a teardrop shape with the same front area.