First is a ti seatpost from aliexpress ("Xian titanproduct" no less). It's sandblasted finish, similar to moots. Diameter is 31.6 (though I found it quite snug in my frame, still fine though), length 35cm. There are the usual insertion scratches, with 14cm (to the rails) of unmarked post. It's straight with a bit of flaring towards the top and the clamp is set back slightly, 0.5-1cm. It's basically this one: http://www.aliexpress.com/store/product/Titanium-Seat-post-CNC-Head/705853_423141347.html£30
Also have a Deda RS01 27.2 post, silvery finish (not polished), barely used. £7 In fact have 2 of these (just one shown).
Barely used "Nitto style design stainless bottle cage" from sprockets UK. Seems to be identical to the style R. Classic looking cage £10
USE thermoplastic seatpost shim 31.6 - 27.2. The lip at the top is bigger than I'd like so replaced it with an alloy one with more discreet lip. free if collected
A few things to move on.
First is a ti seatpost from aliexpress ("Xian titanproduct" no less). It's sandblasted finish, similar to moots. Diameter is 31.6 (though I found it quite snug in my frame, still fine though), length 35cm. There are the usual insertion scratches, with 14cm (to the rails) of unmarked post. It's straight with a bit of flaring towards the top and the clamp is set back slightly, 0.5-1cm. It's basically this one: http://www.aliexpress.com/store/product/Titanium-Seat-post-CNC-Head/705853_423141347.html £30
Also have a Deda RS01 27.2 post, silvery finish (not polished), barely used. £7 In fact have 2 of these (just one shown).
Barely used "Nitto style design stainless bottle cage" from sprockets UK. Seems to be identical to the style R. Classic looking cage £10
USE thermoplastic seatpost shim 31.6 - 27.2. The lip at the top is bigger than I'd like so replaced it with an alloy one with more discreet lip. free if collected
TF imports (Kinoko) fenders, polished, 35mm. Not enough clearance on my bike to fit these unfortunately. Unridden, but a few little scratches from trying to fit, plus the front fitting tab has been bent back and forth a bit. £20
http://i874.photobucket.com/albums/ab301/bjj22/85E8C57F-8F81-4820-B08C-266F2271DF82_zps4acdcrev.jpg
PDW Full Metal Fender - rear only £10
1 Attachment