-
• #2
The bolts are interchangeable from my Grand Mighty's to my DA 7600 so it's not Sugino specific but I guess the cost is similar .
Hubjub stock EAI chainring bolts for about £4.00 I haven't used them so I don't know if they fit . In
the blurb they mention they sell a lot so it's quite likely . -
• #3
Tx ^_^ I'll go ask them then. One of these things...
So...I bought a set of Sugino Grand Mighty on here, and a Sugino Mighty Aero chainring. All good, now to bolt the ring to the cranks. But there's an issue...
My Miche Primato track chainring bolts don't fit, these are too narrow. Little did I know such things aren't standard either...
I measured the chainring holes, which seem 10ish mm. But a lot of sites that sell "track chainring bolts" don't specify the width. So a quick e-bay search didn't really help and the Sugino ones are quite expensive.
Are there any makes I can just get, or has Sugino decided to be awkward and have its own chainring bolt standard?