Carbon forks for steel frame?

You are reading a single comment by @pryally and its replies. Click here to read the full conversation.

•

Hulsroy in reply to @Greenbank

Type: 2 piece Material: carbon fibre high module T700S Finishing:
external lamination 3K Fork Crown and Steerer Aluminium Fork
Drop-outs: Aluminium Steerer: 1 1/8 Fork length dropout to crown:
377mm Mudguard fittings Rake: 44mm Crown diameter: 45mm Weight: 650
grams

Yes but not full carbon and also not designed for ext headset on 1 1/8¨headtube. I would like something sub 450g that takes 28c tyres on a Velocity A23 rim. Eyelets for fenders not a must. Somebody's has got to know if you can fit 28c on Minimal forks??

"The fork is light and strong. Looks good on standard sized steel frame tubes. The fork length is pretty close to what steel frames typically use so the bike geometry remains good. I found that 28mm Hutchinson Sector Tubeless tires mounted on wide rims will fit on this fork. The same wouldn't fit on a Woundup fork. This fork is much nicer than Ritchey's offering. I'd recommend it."

Can anybody varify this?

•

pryally in reply to @Hulsroy

I can once I've been into the loft - I have an enigma frame and minimal fork waiting to be built up.

I will let you know in the next couple of days if you still need to know

•

Hulsroy in reply to @pryally

Thank you. Any news on this? Perhaps a little photo por favor?

About

@pryally started