-
I was using the smallest elastic thing, still slips in the wet.
I did find that a bit of bar tape around the handlebar improved things but it's a messy bodge, especially when the light is not mounted.
I've found a few threads on other forums about people using the Hope handlebar mounts for them so going to give that a shot as they are only like £8 from crc etc and it should work well with my need to transfer the light between bikes, it'll also remove the issue of my constantly losing the rubber ring thing as it's not permanently attached to the mount.
M_V-
Would probably work with the Exposure QR mount and 'cleat' available for the larger lights too but they're more expensive.
-
If you want to try and see, I have a half-broken Hope mount you can have. It's still usable, but I wouldn't trust it on an expensive light - should be good enough to test the theory at least.
atk
rhowe
@M_V use the other size elastic, it should be really tight bordering on hard to put on. I find the large one is good on 31.8 and the small one on 25.4(?)