You are reading a single comment by @ffm and its replies.
Click here to read the full conversation.
-
If you adjust these to get a good alignment then you should be able to make a decent seal.
Yeah, I've tried different alignments, but the weight of the main part of the trap (and other hoses attached) seem to pull it down so that it leaks where the seal is lowest i.e., it's pulled away from the underside of the sink.
ffm
I have the same. The trap has telescopic bits that make it work with almost any plug hole configuration. When fitting mine it took me a while to realise that the telescopic bits would allow me to adjust the height and length of the wastes. Does that make sense?
If you adjust these to get a good alignment then you should be able to make a decent seal.