You are reading a single comment by @7OOx23 and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@7OOx23
I read this advice
"Make a mark on the steerer tube at the top of the stem once the desired stem height is achieved. The actual cutting line must be 2mm below the mark"
I get this but the shim is exactly the same height as the stem, so does that need to be cut back by 2mm also?