You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
-
Why for the love of track nuts can there not just be one standard size!
That would be too easy. There is one standard size, 15mm AF with M10×1.0 threads rear and M9×1.0 front. Then there's non-standard Campag 15mm AF and 10mm/9mm×26tpi, and non-standard Miche 14mm AF with metric threads. Americans use yet another size for BMX hubs, ⅜"×26tpi both ends, apart from the ones which use 14mm×1.0mm nuts or ⅜"×24tpi screws (also found on American Classic track hubs). That just leaves the M6×1.0mm (Novatec) M8×1.25mm (Goldtec rear) and M10×1.5mm (Hope) screws to worry about :-)
gbj_tester
Yukirin
I don't know the thread size. Why for the love of track nuts can there not just be one standard size! I just want my trixie tool to fit it.
I'll measure it in the morning.