You are reading a single comment by @ugosantalucia and its replies.
Click here to read the full conversation.
-
What spokes? DT Comp?
You want 21-22 on the front wheel and a bit more on the rear drive side if it is a dished wheel... say 24 to 25. The Non drive side will come out somewhere around 17 or so depending on the hub geometry. If you have Alpine 3 at the rear, you should aim for the same numbers, provided you measure them well away from the spoke taper, which is quite long in those
ugosantalucia
Well spokes have arrived from Rose, front wheel is built but not tensioned and I'm Very pleased. Can anyone advice on what tensions I should looking to get on my park tools spoke tension gauge???? Don't want to over tighten them... Cheers