You are reading a single comment by @Skant and its replies.
Click here to read the full conversation.
-
Cheers for the bdop link, had been googling and searching ebay and found no simple options.
Re: miche - I've heard enough from both friends and forums to suggest that the quality isn't what it could be and because of that would rather not use them if there's another option.
Low flange - Because I was advised by the guy who designed the rim to use a high flange hub, I'm sure he's erring on the side of caution when giving advice but still it's a valid opinion to consider.
Skant
Try Novatec... BDOPcycling have them in all counts.
Not sure about your statements though... Miche cheese? Why?
BLB low flange, so what? The contribution to stiffness of a high flange hub is close to zero. Roughly speaking, for every millimeter of flange width, you need over 5 mm of flange hight to achieve the same bracing angle... besides, with a 30 mm rim on a track hub you've got all the stiffness you might ever need.
basically you are overcomplicating a wheel which is really that simple