You are reading a single comment by @miro_o and its replies.
Click here to read the full conversation.
-
...the stack is epic
http://www.neilprydebikes.com/bikes/nazare2/bikefit.html
Reach is a teenie bit short. Stack's actually lower than most no?
miro_o-
How the stacks, stack up....
(S) Nazare stack = 539mm
(S) Propel = 534mm
(S) Nitrogen = 533mm (calculated)
(S) Cervelo S3 = 530mm
(S) Scott foil = 527mm
(S) AR1 = 523mm
(S) Fuji Transonic = 497mmMy BMC SLX01 had a stack of around 517mm (calculated), and I ran a slammmed -10 degree, 100mm stem. So With the -12 degree stem I want. Which drops the bars 3mm. I'm looking at around 520mm of stack. Basically anything from the S3 upwards needs a -17 deg stem.
Smallfurry
The Nazare 2 has a lot of changes over the old Alize. Hence the price dump. Still a nice bike.
The local Neil Pryde dealer quoted me a pretty heavy price for a 6870 build, with climbing wheels (which a mate was going to take). Just wasnt doable. Plus, again, the stack is epic.
Slane cycles have a decent price on the new Argon 18 Nitrogen, which is similar. But lower at the front. Silly brakes though.
I've spent soooo much time looking in this and overthinking it.