You are reading a single comment by @Alb and its replies. Click here to read the full conversation.
  • What front hub/wheel you planning on running with the Spyre's @Dom? Careful of anything with a flange-to-flange over 59mm as you'll run into clearance problems with the caliper and spokes. The calipers measure up a bit wider than others due to the arm that extends over the body to acctuate both pistons. Shout if you need a 1mm/0.5mm rotor spacer to eek out a bit more clearance - I've got plenty.

  • Ah, damn. I've gone for Novatec D711SB/D712SB; according to their website the front is F.T.F. 61.6mm and the rear is F.T.F. 58.4mm.

    Do you know if I'll be able to adequately space out the front, or should I be looking at alternative calipers?

  • What front hub/wheel you planning on running with the Spyre's @Dom? Careful of anything with a flange-to-flange over 59mm as you'll run into clearance problems with the caliper and spokes. The calipers measure up a bit wider than others due to the arm that extends over the body to acctuate both pistons.

    Seems I got lucky!

  • Shout if you need a 1mm/0.5mm rotor spacer to eek out a bit more clearance - I've got plenty.

    Hey @Alb, could I please take you up on this?

About

Avatar for Alb @Alb started