You are reading a single comment by @dicki and its replies.
Click here to read the full conversation.
-
does the metal to metal friction on a track cog not help the stick-tion / help it stay in place, if there is a layer of grease surely that could allow for a bit of movement as the grease is gradually squeezed out ... minimal but a possibility
My experience is that a greased cog runs much easier on the threads and therefor goes further and gets tighter.
Never loctite a track cog on, I've had to deal with the aftermath of another (cytec qualified) mechanic doing this and it's an utter clusterfuck.
M_V
@dicki
does the metal to metal friction on a track cog not help the stick-tion / help it stay in place
if there is a layer of grease surely that could allow for a bit of movement as the grease is gradually squeezed out ... minimal but a possibility