-
• #1327
I need a converter to plug a digital sound source into an analogue amp. Is there anything in particular I should be looking for? Recommendations great fully received.
-
• #1328
What is the output from the source?
If it is digital then you will need a DACIs it consumer or studio?
If it is line level (ie consumer analog) then 2 RCA cables will do (unless your amp has weird connectors)
If it is balanced -
• #1329
If the source is just an MP3 player or computer, you can just use a phono to RCA adapter. eBay have them for less than £3
-
• #1330
I need to connect the optical digital audio output from a blueray player into my analogue amp.
-
• #1331
Does your bluray not have analog outs?
If not you will need a DAC and to make sure that the bluray downsamples the digital out to 2.0 (otherwise you will get noise)
-
• #1332
What is the problem?
Looking to get the power circuity upgraded, arm rewire, new motor?
-
• #1333
Could take the audio from the scart lead.
-
• #1334
I mean, all of those things would be nice but...On some Lps the tone arm doesn't move all the way to end of the record. So if the Lp is on the longer end of the scale, it effectively souds like a locked groove.
-
• #1337
I've never seen a bluray player with a SCART port, though HDMI was required, along with a HDCP-compliant display device?
(on the other hand, I probably haven't seen a wide variety of bluray players)
-
• #1338
Which blu ray player is it? Is there only an optical connection?
-
• #1339
I would be surprised if so, as I thought that the spec required an electrical digital output (which could be split out from the hdmi cable) as toslink didn't have enough bandwidth
-
• #1340
Ah I have an LG HR600 (which is a hd freeview, twin tuner, dvd/blue ray 3d blu ray player and net player, given to me as LG replaced it as the solder joints on the aerial were dry). That has a scart output as well as HDMI and audio, thought others might be the same.
I also haven't seen a wide range of devices.
-
• #1341
That does sound like a set up issue.
Have been playing with a Dual 505 that needed meticulous set up of the mechanism underneath to work properly.
-
• #1342
It's a Samsung BD-F6500 and claims to be only an optical output.
-
• #1343
Fuck me... That's got nothing on the back of it.
The DAC route is the only way....
-
• #1344
Bullshit. New amp or DAC then.
Thanks all. -
• #1345
Almost certainly cheaper to buy a slightly better blu ray player...
-
• #1346
Given that the DAC I linked to up there ^^^^^^^^^ is seven pounds, I'm not sure that is true?
-
• #1347
Good point well made. Didn't realise they were that cheap... always thought DACs were around £50 and up.
-
• #1348
China, innit.
-
• #1349
Stick with good quality converters. It's very important. Sorry I can't recommend any in particular.
-
• #1350
Rega?
Project debut?
250 quid to play with....
Dunno I'm listening to Captain Ganja and The Space Patrol
https://www.youtube.com/watch?v=qBV2xrvef80