-
• #602
Just here to say I'm still really happy with my top caps that I got in the first run, well done @mdcc_tester for getting it right again :)
-
• #603
Yeh, that'd be great. I'll send the money now.
-
• #604
I have emailed you my address, if you want to stick @Pete4eyes order in with mine to save on postage you can do.
-
• #605
received spacer, looks amaze cheers
-
• #606
Received today, very pleased. Surprised how light it is - saved entire grams.
-
• #607
You can save a few more with an aluminium screw, which also aligns better. I switched to the stainless steel screws to cater for the ham-fisted, but I use the aluminium ones on my own bikes.
-
• #608
collected from post office today - it's ace - but you already knew that.
Thanks @mdcc_tester -
• #609
These are going to the engraver on Monday, check now for errors, up to 3 places left for any latecomers although if there are any wastages you could be unlucky.
In particular, @danstuff your Brommers Bikes was Brommers|Bikes on your previous ones, are you sure you want it all one line now?
Pete4eyes - DIG | DEEP - Type 2 - PAID
c0gsucker - RIDE|HARD - type 2 - PAID
Sainsburys_Ed - HTFU|IM WALES - type 2 - PAID
Sainsburys_Ed - IF IT'S HURTING ME - type 2 - PAID
danstuff - Brommers Bikes - type 3 in Fiery Aluminium Red - PAID
Joe.S - BWCC|RIDE HARD - Type 4 - PAID
Joe.S - BWCC|RIDE HARD - Type 4 - PAID
mellion - Ta gueule - Type 1 - PAID
Woodster - - Type 2 - PAID -
• #610
Good point - Brommers|Bikes please, like before.
-
• #611
Just realised I put a space either side of the | ... Just checking you didn't think that was intentional...
DIG|DEEP
Thanks! If it's too late, don't worry.
-
• #612
I got mine last week, this is how it looks. good quality goes well with my stem.
3 Attachments
-
• #613
-
• #614
Type 1,3&4 are in the post, type 2 are in the bath and should ship on Friday.
@Sainburys_Ed if I get them on Thursday I'll drop yours off on my way back from the evening 10 if you want.
-
• #615
When can we start making a new list?
-
• #616
You can start the list now, it will need to get quite long to generate any action.
-
• #617
that would be amazing @mdcc_tester
-
• #618
@NurseHolliday - MANDEM|VELO - Type 2
@NurseHolliday - MANDEM|VELO - Type 2
@NurseHolliday - MANDEM|VELO - Type 2
@NurseHolliday - MANDEM|VELO - Type 2
@NurseHolliday - MANDEM|VELO - Type 2 -
• #619
Yes I want 5
-
• #620
Mine's arrived, and it looks excellent. Many thanks once again @mdcc_tester
-
• #621
@RomanX - Straight/Edge - Type 2
Can you make X letter on the left and right side? -
• #622
Can i be on the next list for one of those condor ones in silver
-
• #623
@NurseHolliday - MANDEM|VELO - Type 2
@NurseHolliday - MANDEM|VELO - Type 2
@NurseHolliday - MANDEM|VELO - Type 2
@NurseHolliday - MANDEM|VELO - Type 2
@NurseHolliday - MANDEM|VELO - Type 2
@RomanX - Straight|Edge - Type 2 -
• #624
Cheers mate.
-
• #625
Straight/Edge - Type 2
Can you make X letter on the left and right side?With special arrangements like this, it's best if you provide artwork. 2-colour .png at 1200dpi is fine.
You'll have to wait until about mid Sept as all the ready ones are allocated for people who have already paid for Type 4, but if you pay now I'll put your name on one of the spare raw blanks which will go to the anodiser with the Type 2 orders.