You are reading a single comment by @robertAJB and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
MrNathanHarris
@robertAJB
Before you begin your intrepid journey. One couple sentences of advice..
The first bike I built, by total chance, was made from nice steel. Every bike I've built since has been made from the same stuff. A friend of mine built a bike, starting like you are with a fairly tidy looking frame - got it all the way to the end and it rode... like shit. Really heavy, crappy steel and nasty-as-shit geometry resulted in a super metallic clangy ride. The geometry bit can probably wait but creating a bike from a frame which has been set with good fuckin steel is the difference between loving your new machine and enduring it coz you built it.
Granted, you already have the frame (minus forks by the pic), but consider that. The frame is the fucking nucleus, teh kernel! If its crap - everything is crap, regardless how much care and attention you put into choosing everything else.
The good news is, there's plenty about. Run an ebay search for Reynolds 531 - there's plenty of decent frames made from that which won't cost you the earth.
Good luck!
ps. lots of other questions you might have (best/budget wheels, which stem? etc) are probably quite well served by the Search ^^