-
• #62552
How much movement do you need, it may be possible to fit a spacer onto the bottom bracket to give you a couple of mm. Cassette spacers fit.
-
• #62553
Same for me. Limit screw. Have you tried unscrewing it as far as it will go, undoing the cable then pulling it outwards with your fingers?
-
• #62554
Sounds blindingly obvious! ^
-
• #62555
The laces on my hiking boots are on their way out.
To maximise my wardrobe I'd like to get some
traditionalhipster red laces. Does anyone have any recommendations for good round red hiking boot laces?Cheers.
-
• #62556
is there a standard width for road forks? if i wanted to fit some cyclocross tyres 700c 31-35 would i need to change the fork as well.
-
• #62557
I'd like to try on some Bont Riot MTB shoes. Cannot find anywhere. I have tried a EU43 Riot road shoe at evans but I need to compare it to the MTB version. It seems they are hard to find. Anywhere in London with a good range of Bont shoes?
-
• #62558
I guess you don't mean axle width? They should be a standard 100mm.
Clearance will definitely vary and if it's a modern road bike, you're unlikely to fit anything larger that a 28c on them.
-
• #62559
thanks soul
-
• #62560
Kinoko had some Bont's on display the last time I was there. Worth a call perhaps.
-
• #62561
http://alex.phred.org/stemchart/Default.aspx
plug in -32 as the angle for the jag, the details for the stem you're comparing it to?
-
• #62562
1) dia compe: http://www.wiggle.co.uk/dia-compe-gran-compe-se-threaded-headset/
2) no definitive answer to this question as chainstay angle and length are factors. i've found the phil hub and cog to sit narrow.
-
• #62563
Where's the cheapest place online for a crackpipe for my disc wheel?
-
• #62564
Yes, screws are all the way up, whatever they appear to be.
It's possible to see when pulling manually the derailleur that they are not in the way. The movement is just limited in itself.
Inserting spacers on BB would take the chainset even further away from frame, making it even worth.
Not sure how many mm more I need for the chain to jump on big ring. -
• #62565
Where's the cheapest place online for a crackpipe for my disc wheel?
Would also like to know. I've misplaced mine and am racing this weekend which might be awkward. Fingers crossed I can borrow one at race HQ.
-
• #62566
Tempted by some chinese crabon
The description doesn't state width and I've asked the seller. Is there some magic way to tell what tyre width it'll take from just the content available?
-
• #62568
Where's the cheapest place online for a crackpipe for my disc wheel?
I bought one of Varno's Jap copies from: http://www.v-sprint.com/pages/track-pack.html
-
• #62569
I bought one of Varno's Jap copies from: http://www.v-sprint.com/pages/track-pack.html
-
• #62571
I know it says it works on any disk, but doesn't the little arm on the valve get in the way?
I have a relatively normal circular valve hole but I can see it being a fiddle with that arm thingy.
-
• #62572
It's for skinny tyres so will be a 13mm-15mm rim to take 18-25 or 21-29/32(at a push).
Lots of sellers all like this.
http://www.aliexpress.com/item/60mm-carbon-clincher-fixed-gear-wheels-700c/1418521987.html
If they are thicker rims then they sell them as 29er wheels.
-
• #62573
@Clockwise #rep
Cheers. I figured that 23mm would probably be ok but didn't want to risk it and be forced into 18mm around town.Ta very much.
-
• #62574
I'll stick one in my bag
-
• #62575
https://www.youtube.com/watch?v=nMQ9C6vni0w
Can anyone verify the sentiment of this protest? I have seen it reported in a bunch of anti-israel media and I would like to believe that this many orthodox jews got together to protest the very notion of the current Israeli state, but I also find it almost impossible to believe. A protest focusing against the drafting of Torah students seems more likely, and by doing this it suggests they are happy for people like the orthodox students to remain in Israel/Occupied Palestine. So there seems to be a contradiction. I really get the feeling propaganda has put a spin on this.
Agreed the limit screws appear to be screwed in quite a bit.