You are reading a single comment by @Vince and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Vince
More parts to clear!
*£15 -> £13.50 take both 1" forks and headset
*
A brand new Cane Creek SC-1 1" threadless headset with cartridge bearings, measured stack is 29mm. I bought this years ago then lost it in parts box and now I don't do 1 inch setups so it is surplus to requirements.** Brand new** unused, in box with manual, includes all the bits (crown race, star nut, top cap, etc..)
The forks are Kinesis 6061 Aluminum for 700c wheels. Low rake, no mudguard eyes, pretty light. The threadless steerer is extremely short at 127mm so it will only fit a lo-pro or a small bike with a short headtube.
The blades are aluminium so the will polish to a mirror shine. I have used them with mudguards so you can see some mark which will polish off with sufficient elbow grease.
Based on my calculations, the headset stack is 29mm, a standard ahead stem is 35mm so that would make the max headtube size 63mm. Do-able!
Could also suit a TT project with the stem located in the headtube.
Pick up from Brixton, I can also bring them into work (Putney) and I can (and probably will need to) post for an extra £5.
Cheers
Vince