You are reading a single comment by @number6 and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@number6
here's the front
the hope hub - which i think is Ti, is almost certainly not standard to the original wheelbuild,
spokes are sapim non-bladed unlike the rear,
tied and soldered
front tub is not glued on here - also it seems you'll need to fit a valve extender on that.
i suspect, but can't confirm, that the front has been built to be stronger (with a 2 cross pattern) for track tandem use.
the original would have had a radial spoke build according to the corima website link above
3 Attachments