Got an on-one inbred 18" with an Onza TuffGuy fork. Currently running a Truvativ 80mm 6deg(up) stem without any spacers, without a proper crown race (cartridge straight onto fork with some beercan to take up slack) and I can't clamp the stem tight enough because the steerer stops about 5mm below the top...
I could buy a Syntace Flatforce and run it upside down, but are there any other low-stack stems with a decent angle that are less spendy? 1 1/8th steerer, 31.8mm bar.
£30 is about the cost of a new uncut Onza fork, a starfangle and fitting, so good ebay availability would be nice..
Got an on-one inbred 18" with an Onza TuffGuy fork. Currently running a Truvativ 80mm 6deg(up) stem without any spacers, without a proper crown race (cartridge straight onto fork with some beercan to take up slack) and I can't clamp the stem tight enough because the steerer stops about 5mm below the top...
I could buy a Syntace Flatforce and run it upside down, but are there any other low-stack stems with a decent angle that are less spendy? 1 1/8th steerer, 31.8mm bar.
£30 is about the cost of a new uncut Onza fork, a starfangle and fitting, so good ebay availability would be nice..